Sharing a VPN Connection Through an Ethernet Cable

Before You Start

• Ensure your Windows PC is connected to the internet via Wi-Fi or an Ethernet cable.
• If using Ethernet for the internet connection, you’ll need a second Ethernet port for the device you’re sharing the connection with:
  • For desktops, consider adding a second Ethernet card.
  • For laptops, use Wi-Fi for the internet connection and reserve the Ethernet port for the shared device.

Steps to Share a VPN Connection Over Ethernet

1. Open Network and Sharing Center:
   • Right-click the network icon in the system tray and select Open Network and Sharing Center.
2. Select Change Adapter Options:
   • You’ll see a list of network interfaces, including:
     • Your internet connection.
     • The interface for the device without a VPN.
     • The TAP adapter for the ApexGuard app.
3. Configure the TAP Adapter:
   • Right-click TAP-ApexGuard Windows Adapter and select Properties.
   • Switch to the Sharing tab.
   • Check Allow other network users to connect through this computer’s internet connection.
   • Choose the interface you want to share the connection with and click OK.
4. Connect the device via Ethernet:
   • Once the Ethernet interface is identified, connect to ApexGuard using the app.
   • Your VPN connection is now shared!